As the 3rd item, I wanted to replace crank bearings and rod bearings as many as possible. Below are removed bearings. You can see upper side of rod bearings are worn out and the copper layers are exposed. Lower side rod bearings are also w…

I decide to do 4 items and see how the situations would be improved. 1, To remove the sludge. 2, To adjust the tappets. 3, To replace crank bearings and rod bearings as many as possible. 4, To replace the engine oil. The sludge around the …

I happened had a chance to fix a Subaru Pleo which had a mild charger. Subaru Pleo The odometer said 103,000km but the car ran very well driving in the city. Although it's not young but it looked still good. The only problem was the noisy …

Look at photos below. One of the LEDs is dead. Failed LED units for 2 different high-mount brake light. Another failed unit Both LED high-mount brake lights have a failed LED inside near at the center. The LED alone is not a serviceable pa…

I have fixed the door lock / unlock problem of passenger's side door 2 years ago just cleaning the inside of the motor. You can see it here. http://blogs.yahoo.co.jp/mae_yas/1405005.html It has been working perfectly without any problem. T…

To make a long story short, there were 3 problems hiding. 1, Compression 2, Spark energy 3, Miss wiring 1, Compression As I checked basic items, the compressions were 9.6, 9.6, 8.5 and 9.6kg / a square cm. 3 out of 4 cylinders show mostly …

Below is a forklift with a shovel which is out of use due to the engine problem. The attached shovel This is owned by my brother-in-law and he uses it to remove the snow. He lives in a country side where they have much snow. People there h…

The cable used for the throttle body had 11 insulated wires inside. All wires are flaked just like those wires used for the main engine harness which I have introduced at below. http://blogs.yahoo.co.jp/mae_yas/6953694.html In order to fix…